Muratec MFX-1450 Software Manual page 186

Phenomenon Device to check
Cannot PC
transmit/
receive a fax.
Machine
Network
peripheral
devices (ex.
LAN hub,
router)
6-4 w
indowS
PC_Users_Guide.indb 4
Check point
Check if the LAN cable is
connected.
Check if the LAN cable is
damaged.
Check if the network card
(LAN card) is damaged.
Check to make sure that the
system memory is sufficient.
Check if the power is ON.
Check if the LAN cable is
connected.
Check if the LAN cable is
damaged.
Check if the phone line cable
is connected.
Check if the phone line cable
is damaged.
Check if the communication
line settings (dial or push)
are correct.
Check if an advanced fax
function (ex. Block Junk Fax,
Closed Communication) has
not been set.
Check if the network set-
tings are correct.
Check if the power is ON.
Check if the LAN cable is
connected.
Check if the LAN cable is
damaged.
Check if the network periph-
eral device is damaged.
Check if the network set-
tings are correct.
o
Peration errorS
Countermeasure
Check the LAN cable connection and con-
nect correctly.
Replace the LAN cable.
Replace the network card.
Make sure you have the required memory
space available on your PC. If not, please
add memory. If multiple software applica-
tions or unnecessary resident software are
running, exit them.
Turn ON the power.
Check the LAN cable connection and con-
nect correctly.
Replace the LAN cable.
Check the phone line cable connection and
connect correctly.
Replace the phone line cable.
Check the communication line and set
correctly.
Refer to Chapter 5 "Advanced Fax Func-
tions" in the MFP User's Guide and
change these settings.
Configure the network settings correctly
(refer to page 1-5).
Turn ON the power.
Check the LAN cable connection and con-
nect correctly.
Replace the LAN cable.
Connect the LAN cable to another port on
the device and make sure it operates cor-
rectly. If it fails to operate, please replace
the device.
Refer to the operational manual of the
device and configure the network settings
correctly.
2007/04/27 10:18:15