Muratec MFX-1450 Software Manual page 147

Items
Security
[Initialize]
3
PC_Users_Guide.indb 51
Descriptions
Enter the community name.
The community name is used to check whether incom-
ing SNMP requests have the correct community name
or not. The community name is displayed as ••••• for
security reasons.
The default community name is "public".
You can enter up to 20 characters for the community
name.
For detail, refer to the documentation of the SNMP
manager you are using.
If you want to specify the hosts from which to accept the
SNMP request, check "Accept requests from specified
hosts" and enter the IP address and community name.
Up to three hosts can be registered.
Initialize the SNMP settings. The settings will return to
the factory default setting.
The "Name" and "Location" will not be initialized. To ini-
tialize them, click [Device Settings] from "Management
Information" column, then click [Initialize].
When you are finished, click [Save] to save the settings.
n c
etwork onfiGuration
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
4-51
2007/04/27 10:18:05