MSI 661FM Series User Manual page 47

MSI Reminds You...
1. Available settings for "1st/2nd/3rd Boot Device" vary depend-
ing on the bootable devices you have installed. For example,
if you did not install a floppy drive, the setting "Floppy" does
not show up.
2. If you want to boot from any of the USB-interface devices, please
set USB Keyboard/Mouse Support in SiS OnChip PCI Device
of Integrated Peripherals to Enabled.
Boot Other Device
Setting the option to Enabled allows the system to try to boot from other
device if the system fails to boot from the 1st/2nd/3rd boot device.
CPU L1 & L2 Cache
The item allows you to turn on or off CPU's internal (L1) and external (L2)
cache. Settings: Enabled, Disabled.
CPU L2 Cache ECC Checking
This field is used to enable or disable the CPU L2 Cache ECC Checking function.
Settings: Enabled, Disabled.
Swap Floppy
Setting to Enabled will swap floppy drives A: and B:.
Seek Floppy
Setting to Enabled will make BIOS seek floppy drive A: before booting the
system. Settings: Disabled, Enabled.
Boot Up NumLock Status
This setting is to set the Num Lock status when the system is powered on.
Setting to On will turn on the Num Lock key when the system is powered on.
Setting to Off will allow users to use the arrow keys on the numeric keypad.
Setting options: On, Off.
Typematic Rate Setting
This item is used to enable or disable the typematic rate setting including
Typematic Rate & Typematic Delay.
Typematic Rate (Chars/Sec)
After Typematic Rate Setting is enabled, this item allows you to set the
BIOS Setup
3-9