Color Setup; Ptz Setup - Lorex SG17LD800 Instruction Manual

COLOR SETUP

Displays the settings for Brightness,
Contrast, Tint and Color for individual
cameras.
• Press the ENTER Button and select a
camera.
• Set the Brightness, Contrast, Tint and
Color for each camera. These settings
can be set
1(low)~100(high)
• Press the RETURN button to return to
the Camera Color Setup screen.

PTZ SETUP

PTZ Setup is for PTZ Type Cameras ONLY,
which are not included with this system. For
more information on PTZ Cameras, visit us
on the web at http://www.lorexcctv.com.
• Address - Select the physical address
location of the PTZ Camera (as
connected to the rear PTZ Control
Block. Refer to page 74 for details).
• PTZ Protocol - Select the Protocol for
the PTZ Camera. See the list of
compatible protocols below. Consult the
Owners Manual of the PTZ Camera for
further details.
• Baud Rate - Setup for the PTZ
Communication Speed: (2400, 4800,
9600,19200, 38400 BPS)
Press to enter the Detailed PTZ
Properties screen.
Compatible PTZ Protocols:
Samsung (MRX-1000), Samsung(SCC641), Honeywell(SD1), Honeywell (GMC), Lilin(Fastdome), Fastrax(?),
GC(655N), D-MAX, Sunin DSC-230, Scan Dome-?, Vicon, Philips8560-700, Sensormatic, Panasonic(WV-CS850),
Panasonic(WV-CSR604), VRX-210 Kalatel(KTD-312), PELCO-D, PELCO-P, & Dynacolor(D7722).
to a range of
Camera Menu
35