Lorex SG17LD800 Instruction Manual page 19

Camera Installation
Connecting Cameras
1. Connect the female end of the supplied 100' extension' cable to the camera.
NOTE: Confirm that the arrows on the DIN Camera
Cable and the DIN Extension cable are pointed
together when connecting the cable. If the pins in the
DIN Cable are bent, the Camera will NOT function.
2. Connect the male end of the supplied 100' extension cable to an open DIN camera input on the
back of the System. Continue connecting additional DIN cameras.
NOTE: The arrow on the DIN Camera should be facing up when connecting the DIN Extension
Cable to the Observation System.
19