Accessing The System Board - Lexmark X792de User Manual

Additional printer setup

Accessing the system board

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Note: This task requires a flathead screwdriver.
1
Open the cover.
2
Remove the metal panel.
a
Turn the screws on the panel counterclockwise to remove them.
35