Table of Contents
Advertisement
Available languages
Available languages
OPERATING TV, CABLE TV, VCR
AND CD PLAYER
To confirm the stored ID code
You can check
the stored
ID code
by counting
the indicator
blinking.
You can control
basic functions
of a TV, CABLE
TV, VCR and
CD play(?r with this remote control.
T(3
ENTER
THE
ID
CODE
OF
THE
EXTERNAL EQUIPMENT
MODE
Indicator
SELECT
DIGIT buttons
(o-9)
SET UP
Before attempting
to control
them, be sure to enter the ID code
of the external
equipment
to the remote control
as follows.
1
2
3
4
Confirm
the
code
number
of the
external
equipment.
See the ID code list in the "APPENDIX
at the end of this
manual.
Press either the TV, CABLE, VCR or CD button in
the MODE SELECT area.
Press and hold the SET UP button for about 2.5
seconds.
Confirm that the indicator
blinks twice while pressing
the SET
UP button,
Press three DIGIT buttons which correspond
to
the ID code of the external equipment.
For E?xample, if your CD player is an AIWA unit, the required
ID code is 124 or 157. In this case, press the DIGIT buttons
in the order of"1 ," "2 and "4" (or "1 ," "5" and "7" ).
After the third DIGIT button
is pressed,
the indicator
blinks
twicf? indicating
that the ID code is correct
and is stored
on
the remote control.
1
2
3
4
5
6
Press either the TV, CABLE, VCR or CD button.
For example,
to check thf? stored code for CD player, press,
CD.
Press and hold the
SET IJP
button for about
2.5
seccmds
press
"g;,
"(#,
and
"()
,,
Press"1 ;' and count the indicator blinks.
For example,
in the case that the stored ID is "1 !57."
The indicator
blinks once.
Press "2;' and count the indicator blinks.
The indicator
blinks five times.
Press "3;' and count the! indicator blinks.
The indicator
blinks seven times,
TO CONTROlL TV, CABLE TV, VCR AND CD
PLAYER
CHANNEL
VOLUME
DIGIT buttons
(O-9) and ENTER
MODE SELECT
VCR/CD
ll:Pause,
~: Stop,
POWER
144: Rewind,
P: Play,
ml:
Fast forward
m
1 Press any button in the MODE SELECT areal (TV,
CABLE, VCR or CD),,
The remote
control
is ready to operate
the selected
mods
equipment,
2
Press
one of the buttons
indicated
abIDVe,
For the use of the O – 9 iand the ENTER
buttcms,
see the
instruction
manual
supplied
with the unit to be controlled.
Other
buttons
indicated
above
have the same function
which
you will find on the unit to be controlled,
Ffeenterthe
ID CODE of the external
equipment
alter replacing
the batteries
of the remote control.
If there
are plural
ID codes
for external
equipment
in the
"APPENDIX,"
try each number
listed until you can control the
external
equipment.
EiVGL/SH 16
Hide quick links:
Advertisement
Table of Contents
