Table of Contents
Advertisement
Available languages
Available languages
CUSTOM AUDIO ADJUSTMENT
SUPER T-BASS SYSTEM
Ld
BBE
VOLUIME CONTROL
Turn the VOLUME
control
on
buttons
on the remote control.
1~
I
MUTING
BALANCE
the unit, or press the VOLUME
The volume
level is shown
on the display
for four seconds.
It
can be adjusted
between
O and MAX (31). It flashes when being
set over the level 21.
The volume
level remains
memorized
even after the power
is
turned
ctf. However,
if the power is turned
off when the volume
is set to more than 17, it is automatically
set to 16 the next time
the power is turned on.
To
adjust
the Ieft/right balance of the front speakers
Press the BALANCE
button to display
"L/R
OdB". Then press
the DOWNV
or
UPA
button
repeatedly
within four seconds.
Note that the front speakers
balance
of the 5.1 CH and Dolby
Pro Logic modes is also changed.
To mute the sound temporarily
Press the MUTING
button (-20 dB).
"MUTE
ON" appears
on the display
for four seconds.
While
muting the sound, the selected
function
indicator
flashes.
Press
the MUTING
button again to restore the sound.
BIBE SYSTEM
The BBE system enhances
the clarity of high-frequency
sound.
Press
tlhe
BBE button.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position
to suit your preference.
The T-BASS
system
enhances
the realism
of lo\N-frequency
sound.
Press the T-BASS button.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position
to suit your preference.
m
Low-frequency
sound may be distorted
when the T-EIASS systerm
is used
for a disc or tape
in which
low-frequency
soulnd
is
originally
emphasized.
In this case, cancel the T-BASS
system.
SOUND ADJUSTMENT
DURING
RECORDING
The output
volume
and tone of the speakers
or headphones
may be freely varied without
affecting
the level of the recording.
ml
The BBE system
is automatically
canceled:
- when the Dolby Pro Logic is turned
on
- when the 5.1 CH function
is selected
. The B13E system cannot be turned on while the 5.1 CH function
is selected.
Hide quick links:
Advertisement
Table of Contents
