Paper Type (Drawer[Cassette] No.1 - No) - Kyocera KM-C2630D Operation Manual

Section 7 COPIER MANAGEMENT
Paper type (drawer[cassette] No.1 - No.4)
Perform the following procedure to set the type of paper that is
loaded in drawers[cassettes] No.1 through No.4.
NOTES
• The setting for drawer[cassette] No.1 will not be
available on duplex copiers because the Duplex Unit is
installed in its place.
• The setting for drawer[cassette] No.2 through No.4 will
only be available when the optional Paper Feeder is
installed on your copier.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select one of the "Paper type" settings ("1st
drawer[cassette]" through "4th drawer[cassette]") under
the "Default menu" column on the left side of the touch
panel and then press the "Change #" key.
The screen to set the paper type for that drawer[cassette]
will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Paper type (1st drawer)
Paper type (2nd drawer)
Paper type (3rd drawer)
Paper type (4th drawer)
Check bypass sizing
Default setting
Metric specifications
Default setting/ Counter
Machine default
Default menu
Paper type (1st cassette)
Paper type (2nd cassette)
Paper type (3rd cassette)
Paper type (4th cassette)
Check bypass sizing
Default setting
7-48
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
Up
Auto/Inch
Auto/Inch
Down
Auto/Inch
Auto/Inch
On/Off
Change #
Setting mode
Up
Auto/Centimeter
Auto/Centimeter
Down
Auto/Centimeter
Auto/Centimeter
On/Off
Change #
3
Press the key that corresponds to the type of paper that is
loaded in that drawer[cassette].
Inch specifications
Paper type (2nd drawer)
Select and display paper type.
Default setting - Machine default
Metric specifications
Paper type (2nd cassette)
Select and display paper type.
End
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
End
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Close
Back
High
Plain Color Custom 1
quality
Preprinted Prepunched Vellum Custom 2
Recycled Custom 3
Letterhead Bond Custom 4
Back
High
Plain Colour Custom 1
quality
Preprinted Prepunched Vellum Custom 2
Recycled Custom 3
Letterhead Bond Custom 4
Close
Custom 5
Custom 6
Custom 7
Custom 8
Close
Custom 5
Custom 6
Custom 7
Custom 8