Kärcher G 3000 BH User Manual page 9

Illustration
4.
5.
6.
Description
Attach the handle to the frame
of the pressure washer.
Align holes, insert one 5/16"
bolt (E), and tighten the knob
(F) on each side.
Place the quick connect noz-
zle in the nozzle holder. The
holders use a snap forward
feature.
Push down and snap the noz-
zle forward until you hear it
click into place.
This feature allows you to fold
the handle backward with the
nozzles remaining securely in
place.
Mount the detergent tank by
sliding the tank into position
from either left side or right
side of the frame.
Align the tank into the grooves
found on the support beam
below. Be sure the tank rests
against the frame snugly be-
fore tightening the supplied
1/4" screw (G), washer (H)
and nut (B).
B - nut (2 pieces)
H - washer (2 pieces)
G - screw (2 pieces)
Tools re-
quired
none
none
Phillips Srew-
Driver Size #2
7/16" wrench
or use alterna-
tive size
11mm.
English
9