Operating Instructions - Kärcher G 3000 BH User Manual

CAUTION
This machine is shipped without oil in
the engine crankcase. Add oil before
operating the unit.
Do not run the engine with a high or low
oil level as this can cause engine dam-
age.
If you have further questions regarding
the engine, please refer to the engine
manual included with the unit.
STEP 1:
Check oil level. Oil level should al-
ways be between the "FULL" and
"ADD" marks on the dipstick.
Be sure the machine is level when
checking the oil level. (Refer to the
engine's operating manual for sea-
sonal grades.).
We recommend that the oil be
changed after the first 5 hours of
use, then once every 25 hours.
STEP 2:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Do not add oil to the gasoline.

OPERATING INSTRUCTIONS

STEP 3:
G 3000 BH
Connect the high pressure hose to
the unit's high pressure outlet.
G 3025 BH
Pull back the springloaded collar at
the high pressure outlet and insert
the high pressure hose.
Release the collar and push the high
pressure hose until the collar clicks
WARNING
High pressure in quick connect area.
Risk of injury caused by improperly
locked high pressure hose.
Make sure you hear a 'click' when in-
serting the high pressure hose into
the quick connection.
Pull the high pressure hose to make
sure it is seated properly before op-
erating your unit.
STEP 4:
Connect garden hose to unit's water
inlet.
English
13