Kärcher G 3000 BH Operator's Manual
Hide thumbs Also See for G 3000 BH:

Advertisement

G 3000 BH
G 3025 BH
English
Español
Français
2
23
47
9.139-201.0 10/06

Advertisement

Table of Contents
loading

Summary of Contents for Kärcher G 3000 BH

  • Page 1 G 3000 BH G 3025 BH English Español Français 9.139-201.0 10/06...
  • Page 2: Table Of Contents

    0.05 - 0.10 GPM facturers’ instructions. Engine 187cc Honda GC 190 Kärcher Customer Support USA Part No. G 3000 BH Call: 1-800-537-4129 for help or visit 1.194-601.0 our website: Part No. G 3025 BH www.karcher-usa.com/home Please take a moment to register your 1.194-602.0...
  • Page 3: Model Overview

    MODEL OVERVIEW 1 Handle 10 Detergent metering valve and deter- gent suction tube 2 Trigger gun 11 Quick connect nozzles 3 Trigger gun safety lock 12 Detergent tank 4 High pressure hose 13 Water inlet filter 5 Gas tank 14 Hand grip 6 Spray wand (G 3025 BH only) 7 Dipstick...
  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read the operating instructions of Do not use acids, alkaline, solvents, the engine manufacturer before or any flammable material in this start-up and follow the safety instruc- product. These products can cause tions carefully. physical injuries to the operator and irreversible damage to the machine.
  • Page 5 Do not allow the high pressure hose Avoid tipping the machine on its to come into contact with the muffler side. guard. SAVE THESE INSTRUCTIONS Do not leave the machine running unattended. WATER SUPPLY (Cold Water Only) CAUTION When connecting the water inlet to the water supply mains, local regula- tions of your water company must be observed.
  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Required Tools (not included) Description 1/2” (or 13mm) Socket Wrench 7/16” (or 11mm) Socket Wrench Phillips Srew-Driver Size #2 Flat srew driver Hardware (included) Description Purpose Illustration 5/16“ nut Wheel assembly 1/4” nut Detergent tank / joint as- sembly 5/16”...
  • Page 7 Description Purpose Illustration 5/16” bolt Joint assembly Knob Joint assembly 1/4” screw Detergent tank 1/4” washer Detergent tank Joint Joint assembly Screw (self tap- Accessory holder assem- ping) Hook Accessory holder assem- Hand grip Hand grip assembly (G 3025 BH only) screw M5 x 16 Hand grip assembly...
  • Page 8 Assembling Illustration Description Tools re- quired Position wheels onto each 1/2” wrench or axle followed by the washer use alternative (C) and then the nut (A). size 13mm. Hand tighten with 1/2” (or 13mm) socket wrench. Attach accessory plate to top Phillips Srew- handle.
  • Page 9 Illustration Description Tools re- quired Attach the handle to the frame none of the pressure washer. Align holes, insert one 5/16” bolt (E), and tighten the knob (F) on each side. Place the quick connect noz- none zle in the nozzle holder. The holders use a snap forward feature.
  • Page 10 Illustration Description Tools re- quired Attach the siphon tube from none the pump to the detergent me- tering valve. Assemble Hand grip to the Flat srew driv- (G 3025 BH only ) spray lance. L - handle (2 pieces) M - screw (3 pieces) N - nut (3 pieces) Attach the wand to the spray none...
  • Page 11 Pull the nozzle to make sure it is seated properly before operating your unit. Attach the high pressure hose none 11. G 3000 BH to the spray gun. Pull back the springloaded none G 3025 BH collar at the spray gun and in- sert the high pressure hose.
  • Page 12 Illustration Description Tools re- quired Release the collar and push none the high pressure hose until the collar clicks WARNING High pressure in quick connect area. Risk of injury caused by improperly locked high pressure hose. Make sure you hear a ‘click’...
  • Page 13: Operating Instructions

    OPERATING INSTRUCTIONS STEP 3: CAUTION G 3000 BH This machine is shipped without oil in Connect the high pressure hose to the engine crankcase. Add oil before the unit’s high pressure outlet. operating the unit. Do not run the engine with a high or low...
  • Page 14 STEP 5: Connect garden hose to the cold wa- ter source and turn water on com- pletely. Do not use hot water. STEP 6: Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
  • Page 15: Using The Accessories

    USING THE ACCESSORIES WARNING 40° spray angle = White nozzle For moderate dirt accumulation over a To avoid serious injury never point large surface. spray nozzle at yourself, other per- sons or animals. Quick connect nozzles The color-coded quick connect nozzles provide a wide array of spray widths from 0°...
  • Page 16 For Kärcher Detergents, check STEP 3: your retailer or visit our website: Adjust the detergent metering valve www.karcher-usa.com/home to the desired dosage Kärcher detergents available in USA / Mexico: – All Purpose & Vehicle Cleaner – Exterior House Cleaner –...
  • Page 17: Taking A Break ..Five Minutes Or More

    TAKING A BREAK ..five minutes or more STEP 1: STEP 2: Release trigger and engage gun Engine with manual throttle: safety lock. Move the throttle lever to the SLOW position. Allow the engine to idle for a few seconds, then move the throt- tle lever to the STOP position.
  • Page 18: Winterizing And Long-Term Storage

    Kärcher-Autho- rized Service Center for repair. (You can locate a service center in your area online at www.karcher-usa.com/ser- vice.) Pump Maintenance The pump on your Kärcher pressure washer does not require maintenance.
  • Page 19: Cleaning Tips

    CLEANING TIPS sweeping motion keeping the spray Deck Cleaning nozzle approximately 6 inches from the (with or without detergent). Pre-rinse cleaning surface. deck and surrounding area with fresh CAUTION water. If using Kärcher Deck Wash, ap- Do not use Dirtblaster spray nozzle ply to surface at low pressure.
  • Page 20 For removing extremely faces with plenty of drinking water. stubborn dirt, it may be necessary to For additional cleaning tips, visit our move the spray nozzle even closer to website at www.karcher-usa.com/ the surface for greater dirt cutting ac- home tion. CAUTION...
  • Page 21: Troubleshooting

    TROUBLESHOOTING CAUTION Remove the spark plug cable to prevent accidental ignition of the engine before making any repair. Symptom Cause Solution Engine will not No gasoline Fill gas tank start Choke is not in the correct Pull the choke rod to the position.
  • Page 22 Oil Drip. Oil seals are damaged or worn. Call Customer Support If you encounter any additional difficul- USA: 1-800-537-4129 ties not listed, please call for help or visit www.karcher-usa.com/home our website. Canada: 1-800-537-4129 www.karcher-canada.com Mexico: 01-800-024-13-13 www.karcher.com.mx English...

This manual is also suitable for:

G 3025 bh

Table of Contents