Owner and/ or user must study and maintain for future Specifi cations reference the manufacturer’s instructions. G 3500 OCT servo press Operating Pressure 3500 PSI Kärcher Customer Support USA/ Water Volume 3.2 GPM...
IMPORTANT SAFETY INSTRUCTIONS ■ Do not use acids, solvents, or any alka- ■ Read the operating instructions of the line or fl ammable material in this product. engine manufacturer before start-up and These products can cause physical inju- follow the safety instructions carefully. ries to the operator and irreversible dam- WARNING age to the machine.
WATER SUPPLY (Cold Water Only) ■ Flow rate can be determined by running CAUTION the water for one minute into an empty When connecting to water supply mains, 5-gallon container. local regulations of your municipal water ■ The water supply temperature must not company must be observed.
Page 6
Hardware (included) Description Purpose Illustration Spray Gun Spray Gun Assembly Quick Connect Nozzles Kit Nozzle Kit Assembly Wand Wand Assembly Hose Holder Assembly Washer Hose Holder Assembly Assembling STEP 3: STEP 1: Mount the hose holder to the handle and Attach the handle to the frame of the tighten with nut and washer.
OPERATING INSTRUCTIONS STEP 1: Pull the spring-loaded collar of the wand STEP 4: back to insert your choice of quick connect Adjust working pressure and water vol- nozzle. ume by turning the Remote Pressure Control either direction. Always return the control to the high- est setting before shutting the pressure washer off.
OPERATING INSTRUCTIONS steady fl ow of water to emerge from the spray nozzle. STEP 8: STEP 11: Open fuel valve. Pull the choke rod to the "ON" position (on a warm engine, leave the choke rod in the OFF position). STEP 12: Connect garden hose to unit`s water inlet.
fi lter and will protect the internal parts of the pressure washer for a longer life. For Kärcher Deter- gents, check your retailer or visit our website: karcher.com/us TAKING A BREAK ...fi ve minutes or more STEP 2: STEP 1: Move the engine stop switch to the OFF Release trigger and engage safety lock.
MAINTENANCE INSTRUCTIONS Kärcher pump locate a service center in your area online at: www.karcher-service.com). Initial Use Pump Maintenance All Kärcher pumps ship with oil already inside Change oil after fi rst 50 hours of operation and direct from the factory.
■ For additional cleaning tips, visit our approximately 3-6 inches from the cleaning website at: surface. For best results, clean from top to karcher.com/us bottom and from left to right. English 11...
Please check our website: ■ If painted surfaces are peeling or karcher.com/us, For up-to date information. chipping,use extreme caution as pres- – Extension Hose sure washer may remove the loose paint –...
Page 13
Turn the swivel nut of the gun clockwise LEAKS attached until connection is tight Broken o-ring or plastic Visit www.karcher-help.com or locate a service center at : insert www.karcher-service.com PUMP IS NOISY Not enough gas or engine Check that hoses and fi ttings are air tight.
United States and Canada. This warranty gives you specifi c legal rights. You may have other rights, which vary by country and state/province. Please register online at karcher.com/us/warranty. Online regis- tration is quick, free and provides you with a confi rmation email for your records.