Changing The Display Brightness; Changing The Scanning Mode; Changing The Picture Tone - JVC UX-G70A Instructions Manual

Changing the Display Brightness

You can dim the display window.
TV/VIDEO
DIMMER OFF
DIMMER
(Canceled)
DIMMER ON Dims the display.
AUTO DIM* Removes the display illumination when
starting playback a disc with a video
source.
• The display illuminates when playback
stops.
* "AUTO DIM" does not work for CD/MP3/WMA.

Changing the Scanning Mode

This System supports progressive scanning.
Select the video signal mode according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT jacks, you can enjoy a high quality picture from the
built-in DVD player by selecting "NTSC PROG" or
"PAL PROG."
SCAN MODE
7
(while holding...)
ENTER/SET
NTSC Select for a conventional NTSC TV.
NTSC PROG Select for a progressive NTSC TV.
Select to enjoy a progressive scanned
picture through the Video Component
out terminal.
PAL Select for a conventional PAL TV.
PAL PROG
Select for a progressive PAL TV.
Select to enjoy a progressive scanned
picture through the Video Component
out terminal.
DIMMER ON
AUTO DIM
Remote
INFO
ONLY
PAL PAL PROG
NTSC PROG NTSC

Changing the Picture Tone

• While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
taste.
To select a preset picture tone
1
While playing, display VFP setting screen.
VFP
8
(while holding...)
2
Select a preset picture tone.
NORMAL Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings.
To remove the screen, press VFP again while holding
SHIFT, or wait for more than 5 seconds.
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained above.
2
Select a parameter you want to adjust.
TV CH
TV CH
GAMMA Adjust if the neutral color is bright
or dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright
or dark (–8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
Remote
ONLY
NORMAL
0
GAMMA
0
BRIGHTNESS
0
CONTRAST
0
SATURATION
TINT 0
SHARPNESS 0
On the TV
NORMAL CINEMA
USER2
USER1
ENTER/SET
Continued on the next page
15