Changing The Display Brightness; Setting The Clock; Turning Off The Power Automatically - JVC CA-MXJD3 Instructions Manual

GAMMA Adjust if the neutral color is bright
or dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS Adjust if the picture is bright or
dark as a whole (–8 to +8).
CONTRAST Adjust if the far and near position
is unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
5
Finish setting.

Changing the Display Brightness

You can dim the display window.
DIMMER
NORMAL

Setting the Clock

Main Unit
Without setting the build-in clock, you cannot use Daily/
Recording Timers (see page 37) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
20
Remote
ONLY
ONLY
1
Activate clock setting mode.
CLOCK
/ TIMER
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2
Adjust the hour.
PRESET
3
Adjust the minute.
PRESET
Now the built-in clock starts working.
To check the current time during play
2
sec.
SET
/ DISPLAY

Turning Off the Power Automatically

With Sleep Timer, you can fall asleep listening to music.
1
Specify the time (in minutes).
INFO
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
• If you press repeatedly, you can change the
shut-off time.
SET
/ DISPLAY
SET
/ DISPLAY
Clock
Source information
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
Canceled SLEEP 120
Remote
ONLY
SLEEP 90
SLEEP