Daily Operations-Playback; Turn On The Power; Select The Source; Adjust The Volume - JVC UX-G70A Instructions Manual

Remote control
Disc tray
selecting
buttons
ENTER/SET
TOP MENU/PG
RETURN
2
8
7
1,¡
QP LINK
SHIFT
1
2
DVD/CD FM/AM
3
GROUP
TV VOLUME
VOLUME
4
Daily Operations
1
Number
buttons
MENU/PL
, ,
GROUP/TITLE SKIP
4,¢
FM/PLAY MODE
3
USB LINE
TAPE
ST TA NEWS INFO A.STBY
MP3 WMA MONO
1 DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
RANDOM PRGM 3D PHONIC PRGR. B.S.P. BONUS REC
—Playback
In this manual, operations using the remote control are
mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
1

Turn on the power.

The STANDBY lamp on the main unit goes off.
• Without pressing
by pressing one of the source buttons.
,
• The System turns on and changes the source to LINE
by starting playback on an external device when
QP Link is activated. (See page 12 for details.)
2

Select the source.

Playback automatically starts if the selected source is
ready.
• If you press LINE, start playback on the external
component.
3

Adjust the volume.

4
Operate the target source as explained
later.
To turn off (standby) the unit
You can reduce power consumption by pressing DISPLAY
to turn the display off while on standby.
• When the display is turned off, QP Link does not work.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
REC
1 2 3 connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
AUDIO, the System turns on
The STANDBY lamp on the main unit
lights in red.
• A small amount of power is always
consumed even while on standby.
7