Datamax I-4206 Operator's Manual page 60

System Settings (continued)
COLUMN EMULATION
203 DOTS (180-203)
SOP EMULATION
110 (PRODPLUS)
220 (ALLEGRO)
250 (PRODIGY)
DISABLED
BACK AFTER PRINT
ENABLED
DISABLED
50
Provides compatibility
Datamax products. The Prodigy Plus and
Allegro calculated column positions using
200 DPI math but had 203 DPI printheads.
Also, decreasing the DPI compensates for
different printer
positions.
Selects the desired DPI emulation.
Enables the <STX>O and <STX>f print
positioning commands to allow backward
compatibility with label formats designed
for other printers. (When changing these
values, the printer will automatically feed
two labels to setup the new print position.)
Emulates the Prodigy Plus
Emulates the Allegro
Emulates the Prodigy
No emulation, natural start of print
position.
When the present distance is set with the
cutter, present sensor or GPIO option
enabled, this setting determines the timing
of the label back up.
Commands the printer to immediately back
up the label after the cut operation, the
GPIO start of print signal is received, or the
present sensor is clear. It provides the
advantage of faster throughput.
The printer will not initiate repositioning
until the next label is ready to print. May
help prevent the curling of the label edge.
with
models column "1"
®
printer.
®
printer.
™
printer.
I-Class
legacy