Datamax I-4206 Operator's Manual page 52

Printer Options (continued)
GPIO PORT
GPIO DEVICE
DISABLED
APPLICATOR
BARCODE VERIFIER
START OF PRINT
ACTIVE HIGH
ACTIVE LOW
END OF PRINT
LOW PULSE
HIGH PULSE
ACTIVE LOW
ACTIVE HIGH
42
Model dependant option used to interface
the printer to an external controlling device
(see Appendix D).
Input control signal is required to print a
label.
Disables the GPIO.
Enables the GPIO for a Label Applicator.
Enables the GPIO for the Barcode Verifier.
Programmable signal input controlling the
Start of Print (SOP).
Signal must go high at SOP.
Signal must go low at SOP.
Programmable signal output for End of Print
(EOP).
Low pulse generated at EOP.
High pulse generated at EOP.
Signal goes low at EOP.
Signal goes high at EOP.
I-Class