Datamax I-4206 Operator's Manual page 59

System Settings (continued)
Note: As indicted, the following menu selections will only appear according
to the model of your printer.
ALLEGRO EMULATION
ENABLED
DISABLED
DPI EMULATION
DISABLED
203 DOTS PER INCH
DPI EMULATION
DISABLED
300 DOTS PER INCH
203 DOTS PER INCH
I-Class
This instructs the firmware to process
specific DPL data as would the
®
Allegro printer without all of the
variations.
The row position is calculated based
on 194 DPI.
Lines and boxes: Rotations 2 and 4
are affected by the vertical multi-
plication factor defined in the DPL
Dxx command.
Column positions greater than the
printhead width are adjusted back to
the printable area and printed.
The above exception is disabled.
For users who want to print DPL files
intended for a 203 DPI printer.
Label formats interpreted as intended
for 406 DPI.
Label formats interpreted as intended
for 203 DPI.
For users who want to print DPL files
intended for a 203 or 300 DPI printer.
Label formats interpreted as intended
for 600 DPI.
Label formats interpreted as intended
for 300 DPI.
Label formats interpreted as intended
for 203 DPI.
49