Datamax DGL Programmer's Reference Manual page 52

Appendix A
Datamax Setting
CONTROL CODES
FEEDBACK CHARACTERS
ESC SEQUENCES
HEAT COMMAND
SPEED COMMANDS
Datamax Setting
HEX DUMP MODE
OPTIONS TESTING
PRINT TEST RATE (min)
SENSOR READINGS
RIBBON SENSOR LIMITS
52
Table 5. Communications Menu
Description
Allows the operator to change
the prefix of the software
commands interpreted by the
printer.
*STANDARD CODES
ALTERNATE CODES
ALTERNATE CODES 2
ALTERNATE CODES 3
Returns a Hex 1E, [RS], after
each label successfully prints,
and a Hex 1F, [US], after
each batch of labels is
printed.
ENABLED, *DISABLED
Allows data containing invalid
ESC control code sequences
to be processed.
ENABLED, *DISABLED
Allows the user to disable the
DPL Heat and Speed
Commands.
ENABLED, *DISABLED
Table 6. Diagnostics Menu
Description
Prints data and instructions
received from the host rather
than interpreting them as
label formats
ENABLE, *DISABLE
Tests currently installed
options
The number of minutes to
delay between the printing of
batches of labels in Quick
Test Mode.
*000 (0-120)
Analog Sensor readings are
displayed.
PTX Setting
→
PPI/DGL SETUP Control
Codes
*Standard, Alternate1,
Alternate2, User-defined
→
PPI/DGL SETUP
Feedback Chars
Enable, *Disable
N/A
→
PPI/DGL SETUP Heat
Cmd, Speed Cmd
*Process, Ignore
PTX Setting
→
DIAGNOSTICS Hex
Dump Mode
Enable, *Disable
N/A
N/A
→
CALIBRATE CTRL Media
→
Profile Print Profile