Appendix A
Datamax Setting
CUTTER
SCANNER
GPIO PORT
Datamax Setting
CONFIGURATION FILE
RESTORE AS CURRENT
SAVE SETTING AS
DELETE FILE
FACTORY SETTING FILE
INTERNAL MODULE
DEFAULT MODULE
48
Table 3. Printer Options Menu
Description
Used to cut media into
separate labels.
ENABLED, *DISABLED, NOT
INSTALLED
Used to check the bar codes
on the labels.
Model dependant option used
to interface the printer to an
external controlling device.
Table 4. System Settings Menu
Description
Options for storage and recall
of printer configuration files.
Provides a list of available
configuration files. Selecting a
file from the list causes a
printer reset; afterward, the
printer is configured
according to the activated file.
Saves the entire effective
configuration of the printer to
a file.
Provides a list of available
configuration files to delete.
The selected file will be
restored whenever a Level 1
reset is performed.
Sets the number of 1K blocks
allocated for the internal RAM
'D' module.
*1024 KB
Sets the default module used
to store files when no other
module is specified.*D
PTX Setting
→
MEDIA CONTROL
Media
HandlingCut
VALIDATOR menu
GPIO CONTROL menu and
GPIO Manager
PTX Setting
→
CONFIG CONTROL
Load
Config
→
CONFIG CONTROL
Save
Config
→
CONFIG CONTROL
Delete Config
→
CONFIG CONTROL
Power-Up Config
N/A
→
PPI/DGL SETUP
Default
Module
*RAM, Flash