Datamax DGL Programmer's Reference Manual page 43

<STX>Y Output Sensor Values
DataMax Values do not correspond with PTX values.
<STX>D Memory Dump (Test Mode Only)
<STX>d Set Printer to double buffer mode
<STX>s Set Printer to single buffer mode
This only affects the internal processing of dynamic fields, cannot
be changed in DGL, which always prints using display list.
<STX>g Internal Batch Software Mode
<STX>N Enter Internal Batch
f Set Present Speed
p Set Backfeed Speed
FR[+/-]n Degrees
Label Length:
When Datamax receives a label that exceeds the configured
physical page-length, it will still print the whole job by spanning it
across multiple physical pages. DGL will clip the job at the
configured physical page-length.
Workaround
·<SOH>U Update System Database with Current Database
<STX>KC Get Configuration
<STX>Kc Set Configuration
<STX>Kd Set File as Factory Defaults
<STX>KF Select Factory Defaults
<STX>KQ Query Memory Configuration
<STX>Kq Query Memory Configuration (new format)
<STX>Kx Delete Configuration File
<STX>KD Database Configuration
<STX>KR Reset Memory Configuration
e Recall Printer Configuration
PTX has its own Configuration Management.
<STX>Kr Reset Internal Counters
Use DIAGNOSTICS/Reset Head Data to reset the Head Print
Distance
<STX>KV Verifier Enable/Disable
Use Validator Menu options
<STX>KI GPIO Input
43