Datamax DGL Programmer's Reference Manual page 46

Appendix A
Datamax Setting
LABEL WIDTH
SENSOR CALIBRATION
Datamax Setting
HEAT
PRINT SPEED
FEED SPEED
REVERSE SPEED
ROW OFFSET
COLUMN OFFSET
PRESENT DISTANCE
46
Table 1. Media Settings menu
Description
Sets the maximum limit for
the printable surface width.
Objects extending beyond
this limit will NOT print.
*04.10, 06.61 or 08.52 (0 -
08.52)
Adjusts the printer to sense
your media.
Table 2. Print Control Menu
Description
Controls the 'burn-time' of the
printhead. This is the
equivalent of Heat Setting on
most label software
programs.
*10 (0-30)
Controls the rate of label
movement during the printing
process.
*6 (2-12 ips)
Controls the rate of label
movement between printing
areas.
*6 (2-12 ips)
Controls the rate of label
movement during backup
positioning for start of print,
cutting or present distance.
Shifts the vertical start of print
position.
*00.00in (0-99.99)
Shifts the horizontal, left-
justified start of print position
to the right.
*00.00 in (0-99.99)
Sets the label stop position
past the start of print.
*0.00 in (0-4.00)
PTX Setting
→
MEDIA-CONTROL Label
Width
*04.1, 06.6 or 08.5 (00.1 to
08.5 inches)
CALIBRATE CTRL
PTX Setting
→
MEDIA-CONTROL Print
Intensity
-3* (-15 to 15)
Controls the rate of label
movement during the printing
process.
*6 (2-12 ips)
→
MEDIA-CONTROL Slew
Speed
Automatic*, Manual
6 ips* (1-10 ips)
N/A
→
PPI/DGL Setup Row
Offset
*00.00in (0-99.99)
→
PPI/DGL Setup Column
Offset
*00.00in (0-99.99)
N/A