Table of Contents
Advertisement
1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1.
Remove the back cover.
2.
Insert the loop of the strap, lanyard
or string accessory through the
strap holder hole on the back
cover.
Tip
To pass through the strap
holder hole easier, push the
loop into the strap holder hole
using a pointed object such as a
needle or toothpick.
3.
Attach the loop over the small t-
shaped hook at the bottom of the
device.
4.
Secure the strap, lanyard or string
accessory on the t-shaped hook as
shown on the illustration on the
right.
5.
Replace the back cover.
Getting Started
Advertisement
Table of Contents
