Table of Contents
Advertisement
Using the Strap Holder
The strap holder at the bottom of the back cover of your device allows you to attach a wrist strap, lanyard,
or string accessory.
To attach a strap, lanyard or string accessory to the strap holder:
1.
Remove the back cover.
2.
Insert the loop of the strap, lanyard, or string accessory through the strap holder hole on the back cover.
Tip
To pass a loop through the strap holder easier, push the loop into the strap holder hole using a pointed
object such as a needle or toothpick.
3.
Attach the loop over the small t-shaped hook at the bottom of the device.
4.
Slightly pull the strap, lanyard, or string accessory to fix it securely on the t-shaped hook.
5.
Replace the back cover.
128
Section 2J. Managing Your Device
Advertisement
Table of Contents
