Table of Contents
Advertisement
As the battery is being charged while the power is on, a charging icon
in the title bar of the Home screen. After the battery has been fully charged, a full
battery icon
Warning!
1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1.
Remove the back cover.
2.
Insert the loop of the strap, lanyard
or string accessory through the strap
holder hole at the bottom of the back
cover.
Tip
To pass through the strap holder hole
easier, push the loop into the strap
holder hole using a pointed object
such as a needle or toothpick.
3.
Attach the loop over the small
t-shaped hook at the bottom of the
device.
4.
Secure the strap, lanyard or string
accessory on the t-shaped hook as
shown on the illustration on the right.
5.
Replace the back cover.
appears in the title bar of the Home screen.
• Do not remove the battery from the device while you are charging it using
the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
Getting Started
2
3
appears
Advertisement
Table of Contents
