Table of Contents
Advertisement
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
To perform a hard reset
1.
Pull out the stylus.
2.
With the device turned on, press and hold the VOLUME DOWN and ENTER
buttons, then press the RESET button with the stylus tip.
3.
Release the RESET button, but continue pressing the VOLUME DOWN and
ENTER buttons until you see this message on the screen:
4.
Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP
button to perform the hard reset, or press any other button to cancel the
reset.
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1.
On the Home screen, slide to the Settings tab and then tap All Settings.
2.
On the System tab, tap Clear Storage.
3.
Enter "1234" and then tap Yes.
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press VolUp to restore
manufacturer default, or
press other keys to cancel.
Managing Your Device 89
Advertisement
Table of Contents
