Table of Contents
Advertisement
3.
Tap the name of the Bluetooth headset, then tap Next. The device will
automatically pair the device with the Bluetooth headset.
Windows Mobile will automatically try one of the preconfigured passcodes (0000,
1111, 8888, 14) to pair the Bluetooth headset with the device. If this fails, you
have to enter the passcode delivered with your headset manually.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
repeat step 1 to above. Tap and hold the name of the Bluetooth stereo headset and
tap Set as Wireless Stereo.
9.4 Beaming Information Using Bluetooth
You can beam information, such as contacts, calendar items, tasks, and files from
your device to your computer or to another Bluetooth-enabled device.
Note
If your computer does not have built-in Bluetooth capability, you need to connect
and use a Bluetooth adapter or dongle on your computer.
To beam information from your device to a computer
1.
Turn on Bluetooth on your device, and make your device visible. For
information about this, see "To turn Bluetooth on and make your device
visible".
2.
Set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
Note
If the Bluetooth adapter or dongle on your computer was installed using a third-
party provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle and enable the adapter/dongle to be discovered by other
devices. Refer to the Bluetooth adapter's documentation for more information.
If your computer has Windows Vista or Windows XP SP2 and your
computer's Bluetooth adapter is supported by your Windows version, do the
following steps:
Bluetooth 185
Advertisement
Table of Contents
