Table of Contents
Advertisement
10 Experiencing Multimedia
1
2
•
Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply
to your photos or video clips.
•
Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Choose either Center Area to measure light using the center area of the
subject, or Average to measure light using the area around the subject.
•
Prefix. When Default is selected as the prefix, the file name of each new
captured file is set to "IMAGE" or "VIDEO" followed by a sequential number, for
example: IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
Note
•
Counter. To reset the file naming counter back to 1, tap Reset.
3
4
If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where 'nnnn' is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
1
Tap a property to adjust.
2
Tap to reset all properties to their default
values.
3
Tap to save the settings.
4
/
Tap
left/right (Landscape orientation) to
increase/decrease the value.
5
Tap to close the submenu without
applying and saving the changes.
5
or press NAVIGATION
Advertisement
Table of Contents
