Power Consumption Information - HP Vectra XU6 User Manual

NOTE
5 Technical Information
System Specifications

Power Consumption Information

Full Power mode
Off
When the PC is turned off with the power button on the front panel, the
power consumption falls below 5 Watts, but is not zero. The special
on/off method used by this PC considerably extends the lifetime of the
power supply. To reach zero power consumption in "off" mode, either
unplug the PC from the power outlet or use a power block with a switch.
You should be aware that, in this case, the PC will lose its time settings
within a few days.
Typical Power Consumption/Availability for ISA Accessory Slots
+5 V 1 A limit per slot (limited by system board)
+12 V 0.2 A limit per slot (limited by system board)
- 5 V 0.2 A total power limit (limited by power supply)
-12 V 0.5 A total power limit (limited by power supply)
Typical Power Consumption/Availability for PCI Accessory Slots
+3.3 V 2.5 A maximum per slot
+5 V 2.5 A maximum per slot
+12 V 0.2 A maximum per slot
-12 V 0.2 A maximum per slot
There is a maximum per-slot limit of 15 W between all supply rails.
112 English
280 W
1
< 3 W
1
The power supply in your Vectra PC continues to supply
power to the CMOS memory, even when switched off.