Switch - Grizzly G1035 Instruction Manual

Switch

To install the switch:
1.
Loosen the motor mount bolts shown in
Figure 5.
Figure 5. Loosening motor mount bolts.
2.
Slide the motor to the right and remove the
V-belt. Have an assistant hold the motor, and
temporarily retighten the bolts.
3.
Slide the switch below the motor mounting
bracket, then slide it up between the mount-
ing bracket and motor as shown in Figure 6.
Figure 6. Sliding switch between motor and
motor mounting bracket.
4. Slide the power and swtich cords between
the motor and cabinet (Figure 7) and remove
the switch and grommet from the cabinet.
-14-
Bolts
Motor
Bracket
Figure 7. Removing switch from cabinet.
5. Reinstall the V-belt.
6. Loosen the motor bolts, slide the motor to the
left and tighten the mounting bolts.
7.
Reinstall the motor cover.
8. Install the grommet plate, as shown in Figures
8 & 9, using the screws and nuts already
mounted in the motor cover.
Figure 8. Installing grommet.
Figure 9. Securing grommet to motor cover.
G1035 Heavy-Duty Shaper
Grommet
Plate