Figure 73. Correct rip fence position when per-
forming crosscutting operations.
6.
Position the blade guard to the correct height
for your workpiece.
7.
Once all the necessary safety precautions
have been taken, perform the cutting opera-
tion.
-44-
Miter Cutting
The miter fence allows miter cuts from 30˚
through 135˚ on boards ranging in length from
9
1
⁄
" through 86
1
⁄
". The table mounted miter scale
2
2
1
has a resolution of
⁄
2
slide can be slid into the end of the miter fence to
accommodate cut off lengths both over and under
45" as shown in Figure 74 & 75.
Figure 74. Example of miter cutting operation
for a cut length less than 45".
Figure 75. Example of miter cutting operation
for a cut length over 45".
˚. Either end of the flip stop
G0501 Sliding Table Saw