10
11
Figure 5. Blade guard and dust ports.
9.
Blade Guard—Fully-adjustable blade guard
allows high visibility of the cutting operation
while maintaining maximum protection
around the saw blade.
10. Upper Dust Collection Port—2" port open-
ing allows effective dust extraction from
above the cutting operation.
11. Main Dust Collection Port—5" port allows
efficient high-volume dust extraction from
below the cutting operation.
Figure 6. Rip fence scale.
12. Rip Fence Scale—Allows precise measure-
ment of rip cutting operations. Features a
dual calibration block for effortless scale
reading regardless of whether the fence is in
the high or low position.
-14-
9
12
13
Figure 7. Blades.
13. Main Blade—Performs the cutting opera-
tions.
14. Scoring Blade—Small cutting blade that
rotates opposite the main saw blade. The
blade scores the workpiece before the actu-
al cutting operation is performed; thus, pre-
venting tear-out in laminate materials. The
scoring blade is adjustable forward and
backward, up and down, and in thickness of
kerf.
14
G0501 Sliding Table Saw