Gigabyte GA-VM900MC User Manual page 69

Serial Number View:
Highlight Serial Number View and press <ENTER>. Use the ARROW keys to select a drive, and the
selected drive's serial number can be viewed at the bottom line (Figure 10). The serial number is
assigned by the disk drive manufacturer .
Create Array
Delete Array
Select/Clear Boot Array
Serial Number View
Dev. Posi.
Channel0 Master
Channle1 Master
Serial Number:
Delete Array:
If you want to delete an existing array, select Delete Array in Main Menu and press <ENTER>. Press
<ENTER> on the array to be deleted. A warning message will show up, press <Y> to confirm or press
<N> to cancel (Figure 11).
Create Array
Delete Array
Select/Clear Boot Array
Serial Number View
Data on the raid will be destroyed.
Continue? (Y/N)
Array No. Array Type
(b) Array 0 Stripe
Channel0 Master
Channel1 Master
Deleting a disk array will destroy all the data on the disk array except for RAID 1 array(s). When a RAID
1 array is deleted, the data on the two hard drives will be reserved and the two hard drives will become
two normal drives.
VIA VT8237S V-RAID Utility V1.20
Drive Name Array Name
ST3120026AS Array0
ST3120026AS Array0
3JT329JX
Figure 10
VIA VT8237S V-RAID Utility V1.20
Stripe Size
64K
ST3120026AS
ST3120026AS
Figure 11
- 69 -
View the serial number of
hard disks, it is userful for
identify same model disks.
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC : Exit
Mode Size(GB)
SATA 111.79
SATA 111.79
Delete a RAID array contain
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC : Exit
Cap. (GB)
223.58
111.79
111.79
Status
Stripe
Stripe1
Status
Normal
Stripe0
Stripe1
Appendix