Gigabyte GA-VM900MC User Manual page 58

Step 4:
Press <Esc> and then <Enter> to exit Dual BIOS/Q-Flash and reboot the system. As the system boots,
you should see the new BIOS version is present on the POST screen.
Step 5:
During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press
<Enter> to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we
recommend that you reload BIOS defaults.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
ESC: Quit
F8: Q-Flash
Step 6:
Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The
procedure is complete after the system restarts.
GA-VM900MC Motherboard
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Load Optimized Defaults (Y/N)? Y
Save & Exit Setup
Exit Without Saving
F10: Save & Exit Setup
Load Optimized Defaults
Press <Y> to load BIOS defaults
- 58 -
: Select Item