Table of Contents
Advertisement
2-4
Advanced BIOS Features
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Init Display First
Dual display function
VGA Share Memory Size
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
CPU Hyper-Threading
Limit CPUID Max. to 3
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
CPU Thermal Monitor 2(TM2)
CPU EIST Function
(Note)
Virtualization Technology
: Move
Enter: Select
F5: Previous Values
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card,
PCI Express graphics card, or the onboard VGA.
PCI Slot
Sets the PCI graphics card as the first display.
Onboard VGA Sets the onboard VGA as the first display.
PEG
Sets PCI Express graphics card as the first display. (Default)
VGA Share Memory Size
VGA Share Memory Size is the total amount of system memory allocated solely for the onboard
graphics controller. MS-DOS, for example, will use only this memory for display. Options are:64M
(default), 128M, 256M.
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up
or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus
key <-> (or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when
finished.
First/Second/Third Boot Device
Specifies the boot order from the available devices. Use the up or down arrow key to select a
device and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP,
USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, Legacy LAN, Disabled.
(Note)
This item is present only if you install a CPU that supports this feature. For more information
about Intel CPUs' unique features, please visit Intel's website.
Advanced BIOS Features
[PEG]
[Disabled]
[64M]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
(Note)
[Enabled]
[Disabled]
(Note)
[Enabled]
(Note)
[Enabled]
(Note)
(Note)
[Enabled]
[Enabled]
(Note)
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
- 35 -
Menu Level
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup
Advertisement
Table of Contents
