Power Management Setup - Gigabyte GA-VM900MC User Manual

2-6

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
USB Resume from S3
ACPI Suspend Type
Soft-Off by PWRBTN
AC BACK Function
PS2KB Power On Select
PS2 Mouse Power On
PME Event Wake Up
Modem Ring Resume
Resume by Alarm
x Date (of Month)
x Resume Time (hh:mm:ss)
: Move Enter: Select
F5: Previous Values
USB Resume from S3
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the
installed USB device. (Default: Enabled)
ACPI Suspend Type
Specifies the ACPI sleep state when the system enters suspend.
S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state
(default). In S1 sleep state, the system appears suspended and stays in a low
power mode. The system can be resumed at any time.
S3(STR) Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state. In S3
sleep state, the system appears to be off and consumes less power than in the
S1 state. When signaled by a wake-up device or event, the system resumes to
its working state exactly where it was left off.
Soft-Off by PWRBTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
AC Back Function
Determines the state of the system after the return of power from an AC power loss.
Soft-Off The system stays off upon the return of the AC power. (Default)
Full-On The system is turned on upon the return of the AC power.
Memory The system returns to its last known awake state upon the return of the AC
power.
Power Management Setup
[Enabled]
[S1(POS)]
[Instant-Off]
[Soft-Off]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 39 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup