Setting The Monitor Type - HP J Class Owner's Manual

MONITOR INFORMATION
Type Resolution
–––– ––––––––––
1 1280x1024
2 1024x768
3 1024x768
4 1024x768
5 1280x1024
6 1024X768
7 640X480
8 1280X1024
9 1024X768
10 800X600
11 640X480
12 1280X1024
13 1280X1024
Enter monitor type selection from list above (or 'x' to exit): 2
2 1024x768
Press <y> to save this monitor type or <x> to exit monitor selection: y
D-16

Setting the Monitor Type

Using the list in the example above, you can set the monitor type for
graphics slot 0 by typing the following:
Configuration Menu: Enter command > monitor graphics0
NOTICE: You can exit at this point by entering x, and the
monitor type will not be changed.
The screen displays the choice of supported monitors, similar to the
following. Follow the directions in the screen prompts and enter the
monitor type you want to configure (in this example, number 1).
Frequency
–––––––––
72Hz
75Hz
70Hz
75Hz
60Hz
60Hz
60Hz
75Hz
75Hz
75Hz
75Hz
72HZ
50HZ
75Hz
Flat Panel
VESA
VESA
VESA
VESA
GrayScale
Enter