HP J Class Owner's Manual page 54

2-8
22.
A window appears asking if your printer is powered on, has pa-
per, is connected to your workstation, and is online. Check your
printer to make sure it meets these requirements.
Click on
O K
23.
Click on
O K
The Printer/Plotter Manager window now lists your printer.
24.
Move the cursor to the word List at the top of the Printer/Plot-
ter Manager window and click the left mouse button.
25.
A menu opens below the word List. Click on Exit.
The main SAM window becomes visible again.
26.
In the main SAM window, click on
The SAM window closes.
27.
Double-click on the window menu button in the upper left corner
of the Toolbox window. The window closes.
28.
To test the printer, first create a terminal window by clicking the
Terminal Control on the Front Panel as shown.
.
at the bottom of the Messages window.
Exit SAM
.