HP J Class Owner's Manual page 234

The MONITOR INFORMATION table reappears with the new moni-
tor shown in slot 0.
Slot # HPA
––––––––– ––––––––––
graphics0 f8000000
graphics1 f4000000
graphics2 f6000000
graphics3 fa000000
Current Console Path:
Stable Store Console Path:
Trying to change the monitor type on a slot that cannot support that
monitor results in a warning, as shown in the following example:
Configuration Menu: Enter command > monitor graphics1
MONITOR INFORMATION
Reminder: SGIC only supports one type of monitor.
Changing its monitor type will not have any effect.
Slot # HPA
––––––––– ––––––––––
graphics0 f8000000
graphics1 f4000000
graphics2 f6000000
graphics3 fa000000
Current Console Path:
Stable Store Console Path:
State Resolution
––––––– ––––––––––
Present 1024x768
Present Fixed
Empty
Present 1280x1024
core.RS232_.9600.8.none
GRAPHICS0
State Resolution
––––––– ––––––––––
Present 1024x768
Present Fixed
Empty
Present 1280x1024
core.RS232_.9600.8.none
GRAPHICS0
Frequency Class
––––––––– –––––––
75Hz
72Hz
Enter
Frequency Class
––––––––– –––––––
75Hz
72Hz
D-17