D–2. Mnemonic Style Notation - HP J Class Owner's Manual

Table D–2. Mnemonic Style Notation
I/O Type
Built-in FWSCSI
Built-in SCSI
Built-in LAN
To display the current setting for a particular system path, follow the
directions in "Accessing the Boot Console Interface" earlier in this
appendix, and then type the following at the prompt:
Main Menu: Enter a command or a menu > path path_type
where path_type is one of the path types listed in Table D–1.
For example, to get the path to the primary boot device, follow the
directions in "Accessing the Boot Console Interface" earlier in this
appendix, and then type the following at the prompt:
Main Menu: Enter a command or a menu > path primary
To set a system path to a new value, follow the directions in "Acces-
sing the Boot Console Interface" earlier in this appendix, and then
type the following at the prompt:
Main Menu: Enter a command or a menu > path path_type
where path_type is one of the path types listed in Table D–1 and path
is the specification of the path in Mnemonic Style Notation (as de-
scribed in Table D–2). For example, to set the primary boot path to a
SCSI disk with an ID of 6.0, follow the directions in "Accessing the
Boot Console Interface" earlier in this appendix, and then type the
following at the prompt:
Main Menu: Enter a command or a menu > path pri fwscsi.6.0
Specification Format
fwscsi.scsi_address.logical_unit_number
scsi.scsi_address.logical_unit_number
lan.server_address.init_timeout.io_timeout
Enter
Enter
path
Enter
Enter
D-13