Staple - Ricoh DSc332 Operating Instructions Manual

UNIX Configuration

Staple

Specify the staple position.
1
Limitation
❒ Before executing the "staple" command, make sure the number of collated
sets and the output tray is specified.
❒ When using this option, the optional finisher unit is required.
❒ When printing with this option, be sure to specify the optional finisher using
"finisherproof" or "finishershift" as the value, for example "outbin=finisher-
proof". For more information about the optional finisher unit, see p.25 "Out-
put Tray".
Note
❒ Available staple positions vary depending on the type of output tray you have
installed. For more information about stapling, see Printer Reference 2 (PDF
file) on the CD-ROM labeled "Operating Instructions for Printer / Scanner".
staple=value of staple position
Position
Off
Upper left
Upper right
Upper left slant
Upper left vertical
Left 2
Right 2
Upper right vertical
Upper right slant
Upper 2
Upper left horizontal
Booklet
The following sample shows how to print with the staple on the upper left using
finisher shift tray (host name: "nphost"; file name: "file1"):
• rsh
% rsh nphost print staple=lefttop,outbin=finishershift <
file1
• rcp
% rcp file1 nphost:staple=lefttop,outbin=finishershift
• ftp
ftp> put file1 staple=lefttop,outbin=finishershift
30
Value
off
lefttop
righttop
lefttopslantport lefttopslantland
lefttopvertport lefttopvertland
left2port left2land
right2port right2land
righttopvertport righttopvertland
righttopslantport righttopslantland
top2port top2land
lefttophorizport lefttophorizland
booklet