Dvd Drives - Gateway P-6831 Reference Manual

The text on the display is dim or difficult to read
•
•
•
The display has pixels that are always dark or too bright
•
The display is blank
•
•
•

DVD drives

Your notebook does not recognize a disc
•
•
•
www.gateway.com
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see
page 43.
Change the display settings. For instructions on
changing the display settings, see "Changing screen
settings" in your online User Guide.
Move your notebook away from sources of electrical
interference, such as televisions, unshielded speakers,
microwaves, fluorescent lights, and metal beams or
shelves.
This condition is normal and inherent in the TFT
technology used in active-matrix LCD screens. Gateway's
inspection standards keep these to a minimum. If you
feel these pixels are unacceptably numerous or dense on
your display, contact Gateway Customer Care to identify
whether a repair or replacement is justified based on the
number of pixels affected.
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see
page 43.
Make sure the notebook is not in Sleep or Hibernate
mode. Press the power button.
The notebook may be sending its display to an external
monitor or projector. Press F
toggle through the LCD panel, an external monitor or
projector, or both.
If you are using a tray-load drive, the disc may not be
seated correctly in the tray. When you place a disc on the
tray, make sure that you press the disc firmly onto the
spindle so the retainers hold the disc in place.
Make sure that the disc label is facing up, then try again.
If you are trying to play a DVD, make sure that you have
a DVD drive. For more information, see
types" on page 50.
"Adjusting the brightness" on
"Adjusting the brightness" on
+ F4 several times to
N
"Identifying drive
115