Gateway P-6831 Reference Manual page 71

www.gateway.com
3
Plug the other end of the VGA cable into the monitor
port on your notebook.
-OR-
Plug the other end of the HDMI cable into the optional
HDMI port on your notebook.
4
Turn on your notebook.
5
Plug the projector's, monitor's, or television's power cord
into an AC power source and turn it on.
Windows recognizes the new hardware and the New
Display Detected dialog box opens.
6
Select the options for the projector, monitor, or
television, then click OK.
7
Press F +F4 to switch between viewing the display on
N
the LCD panel, viewing the display on the projector,
monitor, or television, and viewing the display on both
the LCD panel and the projector, monitor, or television.
Important
If a monitor, projector, or television is connected and you close the
LCD panel, your notebook may turn off the LCD panel, but will not enter
Sleep mode.
63