Casio TE-7000S Programming Manual page 33

Addition / Modification
TE-7000S/8000F/8500F Programming Manual
7. Select the row you want to add an item/list or modify and
press the <YES> key, this procedure leads to the next step.
Or designate an item/list directly by pressing <Flat PLU>
0.00
key, entering PLU code <PLU> key or pressing <LIST>key,
this procedure leads to the step 10.
0.00
8. Select "1. PLU" or "2. Pulldown Group" you want to
program.
0.00
9. To choose an appropriate PLU as an item, select a PLU
directly in the shown list, enter PLU No. and press the <PLU>
key or press the appropriate <Flat PLU> key. In this step, you
can use "Character search" to select the item.
If you want to select a list for an item, press the <LIST> key
or enter the significant list number, then press the <LIST #>
key.
10. Repeat step 7 to 9, until completing this pulldown group item
program.
0.00
11. Press the <ESC> key to terminate the program and proceed
to the next step.
12. If you want to use the <LIST> key, press the <YES> key.
After that, select a <LIST> key by pressing the appropriate
key. When the key you pressed is already used, choose YES
to overwrite.
13. If you do not want to use <LIST> key, press the <NO> key.
14. Press the <ESC> key to return to the previous menu.
* Character search: You can search an item by its name.
Press <. (decimal point)> key, enter a few characters and
press the <YES> key.
0.00
The terminal searches the item begins with these characters.
After character search, press <RIGHT ARROW> / <LEFT
ARROW> shows the next/previous candidate.
0.00
*
P-33