Program 6
7. Program 6
7-1. Program read general procedure
Operation:
P-174
1. Sign on a clerk (if necessary).
2. Press <PGM MODE> repeatedly or "6" <PGM MODE> to
assign Program 6 mode.
0.00
3. Press the <YES> key.
0.00
4. Select an appropriate job and press the <YES> key.
5. Select an appropriate job and press the <YES> key.
0.00
The program read report is issued.
If the job requires range designation, the next screen will be
appeared.
0.00
6. Enter the start and end range and press the <YES> key.
The program read report is issued from the printer.