Replacing The Heat Sink And Processor - Gateway FX6800 Reference Manual

Replacing the heat sink and
processor
To replace the heat sink and processor:
1
2
3
64
CHAPTER 1: Upgrading Your Computer
Tools
You need a Phillips screwdriver to replace the heat sink.
Remove the side panel by following the instructions in
"Removing the side panel" on page
For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
Remove the fan cover by squeezing the top (1) and
bottom (1), then pulling the cover (2) out.
1
2
1
45.