Replacing The Heat Sink And Processor - Gateway FX540 Reference Manual

9
10
Replacing the heat sink and
processor
To replace the heat sink and processor:
1
2
3
www.gateway.com
Reconnect the power supply cables using your notes
from Step 2.
Replace the side panel by following the instructions in
"Replacing the side panel" on page
Tools
You need a Phillips screwdriver to replace the heat sink.
Remove the side panel by following the instructions in
"Removing the side panel" on page
For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
Remove the fan cover by holding cables out of the way
and pulling the cover away from the computer.
52.
49.
67