Setting The Chassis On A Desktop - Cisco WS-C5509 Hardware Installation Manual

Chapter 3 Installing the Adaptive Security Appliance
Figure 3-2
.
To remove the chassis from the rack, remove the screws that attach the chassis to the rack, and then
remove the chassis.

Setting the Chassis on a Desktop

To set the chassis on a desktop, perform the following steps:
Locate the rubber feet on the black adhesive strip that shipped with the chassis.
Step 1
Figure 3-3
1
Place the chassis upside down, on a smooth, flat surface.
Step 2
Peel off the rubber feet from the black adhesive strip and press them adhesive-side down onto the bottom four
Step 3
corners of the chassis, see
78-17989-01
Rack-Mounting the Chassis
POW ER
STA TUS
ACT IVE
VPN
FLA SH
Identifying the Rubber Feet
1
2
Rubber feet 2 Black adhesive strip
Figure
CIS CO
AS A 55
Ada ptiv 40
e Sec urit SER IES
y App lian
ce
3-4.
Cisco ASA 5500 Series Hardware Installation Guide
Installing the Adaptive Security Appliance
3-3