Installing the Switch in a Rack
Figure 2-10 Attaching Brackets on Catalyst 2912 LRE XL and 2924 LRE XL Switches (Rear-Panel
Forward
Mounting the Switch in a Rack
Catalyst 2900 Series XL Hardware Installation Guide
2-18
19" configuration
23" and 24" configuration
After the brackets are attached to the switch, use the four supplied number-12
Phillips machine screws to securely attach the brackets to the rack, as shown in
Figure
2-11.
Chapter 2
Installation
Phillips
flat-head
screws
Phillips
truss-head
screws
78-6461-04